Unimog implement carrier


Always keep an eye on the situation.

The front-end dimensions and the position of the driver are especially important when working with front-mounted implements. Compared with the majority of cab-behind-engine trucks, the short-nosed cab of approximately 3.10 m means that the Unimog falls drastically below the maximum guideline value of 3.50 m when a snow plough is fitted.

In the Unimog, even with mounted implements, the line of sight reaches the road at around 10 m and is thus much lower than the stipulated 12 m. The Unimog thus provides optimal all-round visibility thanks to its large-scale panoramic glazing, a slightly rear-biased offset of the driver's seating position and the short front-end dimensions. The Mercedes-Benz Unimog thus helps actively ensure that the driver recognises dangerous situations early on and can thus also react more quickly to them. And that advantage can be made even better thanks to the optionally available camera system with up to three cameras and a single monitor.

Content comfort view 01

Thanks to the optional VarioPilot® transferable steering, drivers always have the best possible seating position. A mowing door with a swivel seat is also available as an optional extra.

Content comfort view 02

Optimising the overview and simultaneously facilitating the coupling up of implements are the two main advantages of the optional camera system. The system comprises a front-mounted and rear-mounted camera, as well as a freely-positionable additional camera for mounted implements. The camera images are shown on a monitor in the interior. As a result, the driver also has a view of the areas around the vehicle, as well as a perfect view of the front mounting plate when swapping implements.

Back to the top